Student Projects Laboratory Overview

Purpose

The purpose of the Student Projects Lab is to give all WMU College of Engineering and Applied Sciences students a designated place to perform hands-on work for any WMU-related class project. It also is used for senior design capstone projects required of all graduating students. The lab is home to the WMU SAE Formula and Baja Racing teams, which do a majority of their design, machining and assembly within the lab. Other Registered Student Organizations such as the Sunseeker Solar Car Team also use the Students Projects Lab when needed. 
 

Location

The Student Projects Lab is located near the end of the “G” wing in Room G-112.
 

Requirements for lab use

  1. The first requirement for students to work in the student projects lab is to be enrolled and currently attending class at WMU’s College of Engineering and Applied Sciences. 
  2. The second requirement is for students to be attending a class that requires the completion of a class project that may need to be designed, fabricated, and assembled. 
  3. Students that are current members of a Registered Student Organization (RSO), involved with faculty lead research projects, or completing a senior design capstone project are also permitted to use the student projects laboratory. 
  4. Students who do not fit into one of the first three requirements are not permitted to use the student projects laboratory.  
  5. Students are required to follow all directions and guidelines listed throughout the “Safety and Basic User Guide” document. 
  6. Violation of any rules listed within the “Safety and Basic User Guide ," "Manual Mill SOP," "Manual Lathe SOP ," or additional rules that may be posted within the student projects lab will result in loss of lab access and use until further notice at the discretion of the Lab Manager or Machine Shop Manager.
 

Lab open

Lab hours are posted on the Student Projects Lab door or follow the link below
 
 

Capabilities

The 2,000 square foot Student Projects Lab allows students the capability to apply traditional machining processes to their projects that include turning on a lathe, milling, sawing, drilling and shaping, and abrasive grinding. The lab also has the capability for students to fabricate portions of their projects through form fitting and fastening methods such as shearing, bending and welding. Small woodworking cutting and sanding equipment also is an option for student use within the projects lab.  
 

Equipment

4.   Powermatic 1200  20” Drill Press
5.   Bitco Machine Tools 1701 HD Drill Press
6.   Rockwell 28-300  14”  Cutting Band Saw
7.   Powermatic 143  14”  Cutting Band Saw
8.   Kalamazoo Horizontal Band Saw H9AW  9”X16”  Metal Cutting
9.   Rockwell 31-501  6”X48”  Vertical Belt Sander
10. Pexto 137-K  37”  Foot Metal Squaring Shear
11. Pexto 3003  Metal Bending Shear
12. Miller Syncrowave 200 TIG Welder
13. Mid-States TriArc 160 Welder
14. 10” Delta Table Saw w/48” extension table
15. Spray-Tech 84” Table Top Paint Booth
16. Various abrasive grinding and cutting power tool equipment
17. Various small woodworking cutting and sanding power tool equipment
18. Complete full set of basic hand tools

 

Please contact Richard Sackett via phone or email for further details regarding the most current lab hours of operation.

 
Staff
Richard Sackett – Student Projects Laboratory Supervisor
Phone: (269) 276-3367
Office: G-112-2