image
image
Recycling Pilot Plant
Paper Pilot Plant
Coating Pilot Plant
Printing Pilot Plant
WMU Paper & Printing Department
Seminars
Shipping
Calendar of Events
Press Releases
Pricing
Literature
Contact Us
Home
image

 

Shipping

Western’s Pilot Plants are physically located in three different buildings each about 3 miles away from the other. Please make special note of the correct pilot plant building you are shipping to—if the wrong destination is used, you may incur additional drop charges by your freight carrier. Use addresses below for UPS shipments and all other freight deliveries.

Jump to printing in Welborn Hall

Jump to papermaking or coating in McCracken Hall

Jump to coating at the Parkview Campus

Parkview Campus
Coating
 

- Coater
- Hot Soft-nip Calender
- Slitter / Rewinder

 

Roll size:

Maximum: diameter 60 in (1500 mm) or 3750 lbs (1700 kg)

Width: 40 in (1 m) nominal, 20 to 43 in (510 to 1090 mm) if not calendering or using steel-to-steel calender nip. 40" wide only if using hot soft -nip calender.

Cores: 3 in (75 mm) ID, 4 in ID, or 6 in ID; 12 in ID, 100 mm and 150 mm may require rewinding

To: Joel Kendrick/Your Name
Western Michigan University
Parkview Campus
4651 Campus Drive
Kalamazoo, MI 49008-5441
Phone: (269) 276-3533
joel.kendrick@wmich.edu

Top

McCracken Hall
Papermaking

 

- Papermaking
- Fiber recycling
- Airknife coater
- CLC-6000 Lab Coater

 

When shipping rolls, please ship on pallets or on their sides. Shipping the rolls end down will result in loss of 1-2 inches of outside wrap when rolls are removed from the truck.


Roll size:

Paper machine size press

     Width: 23 in. (585 mm)
     Diameter: maximum 18" (46 cm)
     Cores: 3 in (75 mm) ID

Airknife coater

    Width: 26 in (660 mm)
     Diameter: maximum 40 in ( 1015 mm )
     Cores: 3 in (75 mm) ID

Slitter/rewinder services are available at WMU.

To: Rick Reames/Your Name
Western Michigan University
McCracken Hall
Hays Drive
Kalamazoo, MI 49008
Phone: (269) 387-2786
richard.reames@wmich.edu

Top

Welborn Hall
Printing
 

- Printing
- Gravure
- Flexography
- Digital
- Offset
- Printabilty Test Labs

 

Roll size:

Gravure press

    Width: 23 in. (585 mm)

    Diameter: maximum 40 in (1015 mm)

    Core: 3 in (75 mm) ID, 6 in ID, or 12 in ID;

    Core: 4 in ID, 100 mm, and 150 mm may require rewinding

Flexo press

    Width: 3 to 10 in (75 to 255 mm)

    Diameter: maximum 40 in (1015 mm)

    Cores: 3 in (75 mm) ID, 4 in ID, or 6 in' ID
    Core: 100 mm and 150 mm may require rewinding

Slitter/rewinder services are available at WMU.

To: John Meyer/Your Name
Western Michigan University
Welborn Hall
Howard St & W Michigan Ave.
Kalamazoo, MI 49008
Phone: (269) 387-2929
john.d.meyer@wmich.edu

Top 

     

image

Validate: XHTML | CSS
Copyright ©2001-02 Western Michigan University, Auxiliary Enterprises, Pilot Plants
Last revised August 29, 2006 , Webmaster
http://www.wmich.edu/pilotplants/shipping.html