Dr. Dan Fleming

Publications

Renmei Xu, Paul D. Fleming III, Alexandra Pekarovicova, and Valery Bliznyuk, “The Effect of Ink Jet Papers Roughness on Print Gloss and Ink Film Thickness”, J. Imaging Sci. Technol. , 49 (6), November/December 2005, 660-665.

Veronika Chovancova, Paul Howell, Paul D. Fleming III and Adam Rasmusson, “Color and Lightfastness of Different Epson Ink Jet Ink Sets”, J. Imaging Sci. Technol., 49 (6), November/December 2005, 652-659.

Miro Suchy, Paul D. Fleming III and Abhay Sharma, “Spot Color Reproduction with Digital Printing”, Proceedings of the IS&T NIP21: International Conference on Digital Printing Technologies , Baltimore, 2005, 93-97.

Veronika Chovancova, Alexandra Pekarovicova and Paul D. Fleming III , “Hot Melt Inks for 3D Printing”, Proceedings of IS&T Digital Fabrication 2005 , Baltimore, 2005, 143-147.

Hrehorova, E., Wood ,, L. K., Pekarovic, J., Pekarovicova, A., Fleming, P. D. , and Bliznyuk, V., “The Properties of Conducting Polymers and Substrates for Printed Electronics”, Proceedings of IS&T Digital Fabrication 2005 , Baltimore, 2005, 197-202.

Wood, L., Hrehorova, E., Joyce, T., Fleming, P. D. , Joyce, M. K., Pekarovicova A. and Bliznyuk, V. “Paper Substrates and Inks for Printed Electronics”, Pira Ink on Paper Symposium , Atlanta , September 28, 2005.

Veronika Chovancova, Alexandra Pekarovicova and Paul D. Fleming III , “Production of 3D Structures in Printing”, Proceedings of the 57 th TAGA Annual Technical Conference, Toronto, Ontario, April 2005, 93-94.

Adam Rasmusson, Veronika Chovancova, Paul D. Fleming III and Alexandra Pekarovicova, “Light Fastness of Pigment-based and Dye-based Inkjet Inks”, Proceedings of the 57 th TAGA Annual Technical Conference, Toronto, Ontario, April 2005, 43-44.

Erika Hrehorova, Alexandra Pekarovicova, and Paul D. Fleming , “Spot Color Consistency for Product Gravure” , Proceedings of the 57 th TAGA Annual Technical Conference, Toronto, Ontario, April 2005.

Kudzai Chigogora, Paul D. Fleming III and Abhay Sharma, “Optimizing Proofing in a Digital Work Flow”, Proceedings of the 57 th TAGA Annual Technical Conference, Toronto, Ontario, April 2005.

Renmei Xu, Alexandra Pekarovicova, Paul D. Fleming , and Valery Bliznyuk , “Physical Properties of LWC Papers and Gravure Ink Mileage”, Proceedings of the 2005 TAPPI Coating & Graphic Arts Conference , April 17-20, in Toronto, ON, Canada.

Hyun-Kook Lee, Margaret K. Joyce, Paul D. Fleming, and James E. Cawthorne, “Influence Of Silica and Alumina Oxide On Coating Structure and Print Quality Of Ink Jet Papers”, TAPPI Journal, 4, 11-16 (2005).

Hyun-Kook Lee, M. K. Joyce, and Paul D. Fleming, “Influence of Pigment Particle Size and Pigment Ratio on Printability of Glossy Inkjet Paper Coatings”, JIST, 49, Number 1, January/February 2005, pp54-60.

Veronika Chovancova, Paul Howell, Paul D. Fleming III and Adam Rasmusson, “Printability of Different Epson Ink Jet Ink Sets”, Proceedings of the IS&T NIP20: International Conference on Digital Printing Technologies, Salt Lake City , 2004.

Renmei Xu, Paul D. Fleming III and Alexandra Pekarovicova, “The Effect of Ink Jet Papers Roughness on Print Gloss and Ink Film Thickness” Proceedings of the IS&T NIP20: International Conference on Digital Printing Technologies, Salt Lake City , 2004.

Hyun-Kook Lee, M. K. Joyce, and Paul D. Fleming, “Interpretation of Paper Gloss and Associated Printability in terms of Pigment Particle Size and Composition for Glossy Ink Jet Papers”, Proceedings of the IS&T NIP20: International Conference on Digital Printing Technologies, Salt Lake City, 2004.

Paul D. Fleming , “Printing”, Encyclopedia of Forest Sciences, Jeffery Burley Editor, Volume 2, pp678-686, Elsevier Academic Press, Oxford 2004.

Xiaoying Rong, Paul D. Fleming, and Abhay Sharma, “Quantitative Analysis of ICC Profile Quality for Scanners”, Proceedings of the 56th Annual TAGA Technical Conference, New Orleans , LA , April 2004.

Paul D. Fleming, J. Dollak, and S. Fryzlewicz, “Stochastic Screening using Photoshop: What to do when your RIP doesn't Support It”, J. Graphic Technology, 3, 15 (2004).

Paul D. Fleming, H. Jewell and Aniruddha D. Khandekar, “The Leverage of Gray Balance in Controlling Perceptual and Quantitative Colorimetry”, J. Graphic Technology, 3, 43 (2004).

Paul D. Fleming III, Veronika Chovancova, Ben Starr and Abhay Sharma, “CRT and LCD Monitors for Soft Proofing”, Proceedings of the 55th Annual TAGA Technical Conference, Montreal, Quebec, Canada, April 6-9, 2003.

Paul D. Fleming , James E. Cawthorne, Falguni Mehta, Saurabh Halwawala and Margaret K. Joyce, “Interpretation of Dot Area and Dot Shape based on Image Analysis”, Journal of Imaging Science and Technology, 47, 394 (2003).

Hyun-Kook Lee, M. K. Joyce, and Paul D. Fleming, “Influence of Pigment Particle Size and Packing Volume on Printability of Glossy Inkjet Paper Coatings”, Proceedings of the IS&T NIP19: International Conference on Digital Printing Technologies, New Orleans, October 2003, pp613-618

Burak Aksoy, Margaret K. Joyce and Paul D. Fleming, “Comparative Study of Brightness/Whiteness Using Various Analytical Methods on Coated Papers Containing Colorants”, Proceedings of the TAPPI Spring Technical Conference & Trade Fair, Chicago, May 2003.

Burak Aksoy, Margaret K. Joyce and Paul D. Fleming, “Exploring Myths of Measured and Perceived Whiteness”, In review for JOSA A.

Burak Aksoy, Paul D. Fleming, Margaret K. Joyce and Abhay Sharma, “New Measures Of Whiteness That Correlate With Perceived Color Appearance”, in Review for JOSA A .

Burak Aksoy, Paul D. Fleming and Margaret K. Joyce, “Whiteness Evaluations On Tinted And FWA Added Papers”, in Review for JOSA A.

Burak Aksoy, Margaret Joyce, and Paul D. Fleming III, “Effect Of Zirconium Insolubilizers On Silica Coating Rheology”, J. Coating Technology, in press.

James E. Cawthorne, Margaret Joyce and Paul D. Fleming, “Use of A Chemically Modified Clay As A Replacement For Silica In Matte Coated Ink Jet Papers”, J. Coat. Tech, , 75, No. 937, pp 75-81, Feb. 2003.

Alexandra Pekarovicova, Hrishikesh Bhide, Paul D. Fleming III, and Jan Pekarovic, “Phase Change Inks”, J. Coat. Tech, , 75, No. 936, pp 65-72, Jan. 2003.

Abhay Sharma and Paul D. Fleming, “Measuring the Quality of ICC Profiles and Color-Management Software”, Seybold Report, Vol. 2, No. 19 January 13, 2003.

Hyun Kook Lee, Margaret K. Joyce, Paul D. Fleming and, John Cameron, “Production of a Single Coated Glossy Inkjet Paper Using Conventional Coating and Calendering Methods”, Proceedings of the TAPPI Coating Conference, May 2002.

Paul D. Fleming, James E. Cawthorne, Falguni Mehta, Saurabh Halwawala and Margaret K. Joyce, “Interpretation of Dot Area and Dot Shape based on Image Analysis", Proceedings of the IS&T NIP18: International Conference on Digital Printing Technologies , San Diego, October 2002.

Paul D. Fleming and Abhay Sharma, "Color Management and ICC Profiles; Can’t Live Without It So Learn To Live With It!”, Gravure Magazine, August 2002, p56.

Abhay Sharma and Paul D. Fleming, “Evaluating the Quality of ICC Color Management Profiles”, Proceedings of the 2002 TAGA Annual Technical Conference, Ashville, NC, April 14-17, 2002, p336.

Peter E. Parker, Paul D. Fleming, Steve Beyerlein, Dan Apple and Karl Krumsieg, “SII Assessments as Tools for Continuous Improvement of Learning Skills”, Proceedings of the 31st ASEE/IEEE Frontiers in Education Conference, Oct. 10-13, 2001, Reno.

Rudolf Haraga, Margaret K. Joyce, Paul D. Fleming and Thomas W. Joyce, “Influence of Starch Modifications on Silicone Holdout for Release Papers”, In review for Paperi ja Puu.

Rudolf Haraga, Margaret K. Joyce, Paul D. Fleming and Thomas W. Joyce, “New Test for Determining Silicone Holdout of Release Papers”, In review for Paperi ja Puu.

Chandra Duraiswamy, Thomas W. Joyce, Margaret K. Joyce and Paul D. Fleming, “Effects of Starch Type on the Silicone Holdout of Release Papers”, TAPPI J., Peer Reviewed Paper, March 2001, 84, No. 3.

Dewei Qi, Paul D. Fleming and Margaret Joyce, “Analysis of Microstructure of Coating Suspensions” Int. J. Powder Technology 104 50 (1999)

Dewei Qi, Paul D. Fleming and Margaret Joyce, “Numerical Experiments of Microstructure of Coating Particles”, Proceedings of the TAPPI Coating/Papermaking Conference, p51, May 1998.

D. R. Wiff, G. M. Lenke and P. D. Fleming, “Polycarbodiimide/Cyanate and Polyimide/Cyanate Thermoset In-Situ Molecular Composites”, J. Mat. Res., 13, No. 7, 1, Jul. (1998)

O. H. Yeoh and P. D. Fleming, “A New Attempt to Reconcile the Statistical and Phenomenological Theories of Rubber Elasticity” J. Pol. Sci. B: Pol. Phys., 35, 1919 (1997)

S. Misra, P. D. Fleming, and W. Mattice, “Structure and Energy of Thin Films Poly(1,4-cis-butadiene): A New Atomic Approach”, J. Comp. Aided Mol. Des. 2 (1995).

D. Wiff, G. Lenke, and P. D. Fleming, “In Situ Thermostat Molecular Composites”, J. Pol. Sci. B: Pol Phys. 32, 2555, (1994).

Recent Presentations

Veronika Chovancova, Alexandra Pekarovicova and Paul D. Fleming III , “Production of 3D Structures in Printing”, Presented at the 57 th TAGA Annual Technical Conference, Toronto , Ontario, April 2005.

Adam Rasmusson, Veronika Chovancova, Paul D. Fleming III and Alexandra Pekarovicova, “Light Fastness of Pigment-based and Dye-based Inkjet Inks”, Presented at the 57 th TAGA Annual Technical Conference , Toronto, Ontario, April 2005.

Erika Hrehorova, Alexandra Pekarovicova, and Paul D. Fleming , “ Spot Color Consistency for Product Gravure” , Presented at the 57 th TAGA Annual Technical Conference , Toronto, Ontario, April 2005.

Kudzai Chigogora, Paul D. Fleming III and Abhay Sharma, “Optimizing Proofing in a Digital Work Flow”, Presented at the 57 th TAGA Annual Technical Conference , Toronto, Ontario, April 2005.

Renmei Xu, Alexandra Pekarovicova, Paul D. Fleming , and Valery Bliznyuk , “Physical Properties of LWC Papers and Gravure Ink Mileage”, Presented at the 57 th TAGA Annual Technical Conference , Toronto, Ontario, April 2005.

Renmei Xu, Alexandra Pekarovicova, Paul D. Fleming , and Valery Bliznyuk , “Physical Properties of LWC Papers and Gravure Ink Mileage”, Presented at the 2005 Coating & Graphic Arts Conference , April 17-20, in Toronto, ON, Canada.

Margaret Joyce and Paul D. Fleming III , “WMU Academic Update”, Presented at the 2005 Coating & Graphic Arts Conference , April 17-20, in Toronto, ON, Canada.

Veronika Chovancova, Alexandra Pekarovicova and Paul D. Fleming III , “Production of 3D Structures in Printing”, Poster presented at the 2005 Coating & Graphic Arts Conference , April 17-20, in Toronto, ON, Canada.

Adam Rasmusson, Veronika Chovancova, Paul D. Fleming III and Alexandra Pekarovicova, “Light Fastness of Pigment-based and Dye-based Inkjet Inks”, Poster presented at the 2005 Coating & Graphic Arts Conference , April 17-20, in Toronto, ON, Canada.

L . Pal, M . K. Joyce , and P . D. Fleming , “Pore Structure Parameters Properties - Effect on Barrier and Printing properties of Paper and Paperboard” , Poster presented at the 2005 Coating & Graphic Arts Conference , April 17-20, in Toronto, ON, Canada.

Erika Hrehorova, Alexandra Pekarovicova, and Paul D. Fleming , “ Spot Color Consistency for Product Gravure” , Poster presented at the 2005 Coating & Graphic Arts Conference , April 17-20, in Toronto, ON, Canada.

Miro Suchy, Paul D. Fleming III and Abhay Sharma, “Spot Color Reproduction with Digital Printing”, Presented at the IS&T NIP21: International Conference on Digital Printing Technologies , Baltimore, 2005.

Veronika Chovancova, Alexandra Pekarovicova and Paul D. Fleming III , “Hot Melt Inks for 3D Printing”, Presented at the IS&T DF05 International Conference on Digital Fabrication Technologies , Baltimore, 2005.

Hrehorova, E., Wood ,, L. K., Pekarovic, J., Pekarovicova, A., Fleming, P. D. , and Bliznyuk, V., “The Properties of Conducting Polymers and Substrates for Printed Electronics”, Presented at the IS&T DF05 International Conference on Digital Fabrication Technologies , Baltimore, 2005.

Wood, L., Hrehorova, E., Joyce, T., Fleming, P. D. , Joyce, M. K., Pekarovicova A. and Bliznyuk, V. “Paper Substrates for Printed Electronics”, Presented at the Pira Ink on Paper Symposium, Atlanta, September 28, 2005.

L. Pal, M. K. Joyce and P. D. Fleming , “ A Simple Method for Calculation of Permeability Coefficient of Porous Media”, Presented at the TAPPI Advanced Coating Symposium , Turku, Finland, February 8-10 (2006).

Veronika Chovancova, Paul Howell, Paul D. Fleming III and Adam Rasmusson, “Printability of Different Epson Ink Jet Ink Sets”, Presented at the IS&T NIP20: International Conference on Digital Printing Technologies, Salt Lake City , 2004.

Renmei Xu, Paul D. Fleming III and Alexandra Pekarovicova, “ The Effect of Ink Jet Papers Roughness on Print Gloss and Ink Film Thickness” Presented at the IS&T NIP20: International Conference on Digital Printing Technologies, Salt Lake City , 2004.

Hyun-Kook Lee, M. K. Joyce, and Paul D. Fleming , “Interpretation of Paper Gloss and Associated Printability in terms of Pigment Particle Size and Composition for Glossy Ink Jet Papers”, Presented at the IS&T NIP20: International Conference on Digital Printing Technologies , Salt Lake City, 2004.

Xiaoying Rong, Paul D. Fleming, and Abhay Sharma, "Quantitative Analysis of ICC Profile Quality for Scanners”, Presented at the 56th Annual TAGA Technical Conference, New Orleans , LA , April 2004.

Paul D. Fleming III and Margaret K. Joyce, “Ink Jet Papers in the 21 st Century” Invited Paper for the European Coating Conference: The Power of Ink Jet Materials, December 4,5, 2003, Berlin Germany.

Hyun Kook Lee, Margaret K. Joyce and Paul D. Fleming, “ Influence of Pigment Particle Size and Packing Volume on Printability of Glossy Inkjet Paper Coatings", Presented at The IS&T NIP19: International Conference on Digital Printing Technologies, New Orleans , October 2003.

Paul D. Fleming, “Issues in color measurement and need for new SWOP guidelines to address these issues”, CIG Lunch & Learn: Printing & Converting Common Interest Group Meeting, TAPPI Spring Technical Conference & Trade Fair, Chicago, May 2003.

Paul D. Fleming, “Integrating Digital Printing Technology Into Conventional Printing”, Advances in Variable Imaging Technology Roundtable, TAPPI Spring Technical Conference & Trade Fair, Chicago, May 2003.

Burak Aksoy, Margaret K. Joyce and Paul D. Fleming, “Exploring Myths of Measured and Perceived Whiteness”, Proceedings of the TAPPI Spring Technical Conference & Trade Fair, Chicago, May 2003.

Paul D. Fleming III, Veronika Chovancova, Ben Starr and Abhay Sharma, “CRT and LCD Monitors for Soft Proofing”, Presented at the 55th Annual TAGA Technical Conference, Montreal, Quebec, Canada, April 6-9, 2003.

Paul D. Fleming, James E. Cawthorne, Falguni Mehta, Saurabh Halwawala and Margaret K. Joyce, “Interpretation of Dot Area and Dot Shape based on Image Analysis”, Presented at the IS&T NIP18: International Conference on Digital Printing Technologies, San Diego, October 2002.

Abhay Sharma and Paul D. Fleming, “Evaluating the Quality of ICC Color Management Profiles”, Presented at the 2002 TAGA Annual Technical Conference, Ashville, NC, April 14-17, 2002.

Larry Ahleman and Paul D. Fleming, “Introduction to Graphic Imaging”, Presented to Middle School Students as part of Western Michigan University Gear-Up Program, July, 2002.

Paul D. Fleming, “Review of Printing Processes and Digital Color”, Training Program presented to Diversified Chemical Technologies, September, 2002.