link to Western Michigan University Home Page Link to about WMU

HOME > Faculty & Staff > Van Maltby

Publications
by Van Maltby

Maltby, V., Summary of treated effluent color loads, permit limits, and water quality standards for U.S. pulp and paper mills.”  NCASI Technical Bulletin No. 943, November 2007.

Maltby, V., A review of |Canadian forest products industry landfill design, construction, operation, and closure.”  NCASI Technical Bulletin No. 928, December 2006.

Maltby, V., “Compilation of alternative landfill cover experience using wastewater treatment plant residuals.”  NCASI Technical Bulletin No. 900, May 2005.

Palumbo, J., Maltby, V., “The effect of data availability and model complexity on the Buxahatchee creek TMDL.”  NCASI Technical Bulletin No. 878, May 2004.

Merrill, Douglas, Maltby, V., “Investigation of advanced techniques to remove low-level mercury from pulp and paper mill effluents.”  NCASI technical Bulletin No. 870, March 2004.

Unwin, J., Maltby, V., Thacker. W., Miner, R., “Opportunities and Obstacles in Sludge Management Facing the US Pulp and Paper Industry,” Presented to the 2002 International Forum on Advanced Environmental Technology, Taipei, Taiwan.  November 2002.

Maltby, V., Literature Review of Emissions of Mercury From Fossil Fuel and Biomass Combustion and Emerging Control Technologies,”  NCASI Technical Bulletin No. 851, September 2002.

Maltby, V., Laboratory Hydraulic Conductivity Testing Protocols for Paper Industry Residuals Used for Hydraulic Barrier Layers,”  NCASI Technical Bulletin No. 848, June 2002.

Maltby, V., “Review of the Literature on Methods of Estimating Seepage from Unlined Ponds,” NCASI Technical Bulletin No. 830,  August 2001.

Maltby, V., “Bench-Scale Testing of Processes to Reduce Metal Concentrations in Pulp and Paper Mill Wastewaters,” NCASI Technical Bulletin, No. 807, 2000.

Melcer, H., Maltby, V., Lang, R., and Vigil, S., “Evaluation of the U.S.EPA-Recommended Approach to Predicting Air Emissions from Pulp and Paper Industry Landfills,” Tappi Journal, Vol. 82, No. 12, December 1999.

Melcer, H., Maltby, V., Lang, R., and Vigil, S.,  “Evaluation of the U.S.EPA-Recommended Approach to Predicting Air Emissions from Pulp and Paper Industry Landfills,” NCASI Technical Bulletin No. 790, September 1999.

Malmstead, M.J., Bonistall, D.F. and Maltby, C.V., “Closure of a Nine-Acre Industrial Landfill Using Pulp and Paper Mill Residuals,” Tappi Journal, Vol. 82 No. 2, February 1999.

Maltby, V., Benson, C., Wang, X., “Effect of freeze-thaw on the hydraulic conductivity of three paper mill sludges:  laboratory and field evaluation.”  NCASI Technical Bulletin No. 750, July 1998.

Melcer, H., Merrill, D., Gerhardt, M., and Maltby, V., “Technical and Economic Feasibility Assessment of Metals Reduction in Pulp and Paper Mill Wastewaters,” Tappi Environmental Conference Proceedings, Vancouver, April 1998.

Melcer, H., Lang, R., Vigil, S., and Maltby, V., “Evaluation of the U.S.EPA-Recommended Approach to Predicting Air Emissions from Pulp and Paper Industry Landfills,” Tappi Environmental Conference Proceedings, Vancouver, April 1998.

Maltby, V. “Technical and Economic Feasibility Assessment of Metals Reduction in Pulp and Paper Mill Wastewaters,” NCASI Technical Bulletin No. 756, May 1998.

Maltby, V., “A Field-Scale Study of the Use of Paper Industry Sludges in Landfill Cover Systems:  Final Report,” NCASI Technical Bulletin No. 750, November 1997.

Maltby, V., “An Evaluation Framework for the Hydrologic Evaluation of Landfill Performance (HELP)  Version 3 Model:  Part III.  Verification and Code Analysis,” NCASI Technical Bulletin No. 749, November 1997.

Maltby, V., “An Evaluation Framework for the Hydrologic Evaluation of Landfill Performance (HELP)  Version 3 Model:  Part II. Sensitivity, First Order Error, and Monte Carlo Analyses,” NCASI Technical Bulletin No. 748, November 1997.

Maltby, V., “An Evaluation Framework for the Hydrologic Evaluation of Landfill Performance (HELP)  Version 3 Model:  Part I. Model Evaluation,” NCASI Technical Bulletin No. 747, November 1997.

Kraus, J.F., Benson, C.H., Maltby, C.V., and Wang, X., “Laboratory and Field Hydraulic Conductivity of Three Compacted Paper Mill Sludges,”  Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 123, No. 7, July 1997.

Saunders, F., Maltby, V., “Results of laboratory microcosm studies of the anaerobic biodegradation of chloroform in subsurface environments.”  NCASI Technical Bulletin No. 716, June 1996.

Maltby, V., “An Analysis of the Relative Performance of POTW and Paper Industry Wastewater Treatment Systems on Conventional and Non-conventional Pollutants,”  NCASI Technical Bulletin No. 708, January 1996.

Maltby, V. and Eppstein, L.K., "A Field-Scale Study of the Use of Paper Industry Sludges as Hydraulic Barriers in Landfill Cover Systems," Hydraulic Conductivity and Waste Contaminant Transport in Soil, ASTM STP 1142, American Society for Testing and Materials, Philadelphia, 1994.

Maltby, V., “The Effects of Recovered Fiber Reuse on Raw and Final Effluent BOD, TSS, and Color Loads from Unbleached Kraft and Semi-Chem Mills,” NCASI Technical Bulletin No. 670, July 1994.

Maltby, V., “Review of Rate Structures, Treatment Costs, and Pretreatment Requirements for Indirect Discharging Paper Mills and Converting Operations,”  NCASI Special Report No. 92-02, January 1992.

Maltby, V., and Unwin, J.P., “A Field Investigation of Ground-Water Monitoring Well Purging Techniques,” Current Practices in Ground Water and Vadose Zone Investigations, ASTM STP 1118, D.M. Nielson and M.N. Sara, Eds., American Society for Testing and Materials, Philadelphia, 1992.

Maltby, V., “Full-Scale Experience With the Use of Screw Presses for Sludge Dewatering in the Paper Industry,”  NCASI Technical Bulletin No. 612, July 1991.

Maltby, V., “A Field-Scale Study of the Use of Paper Industry Sludges In Landfill Cover Systems:  First Progress Report,”  NCASI Technical Bulletin No. 595, September 1990.

Maltby, V., “Experience With and Laboratory Studies of the Use of Pulp and Paper Mill Solid Wastes in Landfill Cover Systems,”  NCASI Technical Bulletin No. 559, January 1989.

Unwin, J. and Maltby, V., “Investigations of Techniques for Purging Ground-Water Monitoring Wells and Sampling Ground Water for Volatile Organic Compounds,” Ground Water Contamination:  Field Methods, ASTM STP 963, A.G. Collins and A.I. Johnson, Eds., American Society for Testing and Materials, Philadelphia, 1988.

Maltby, V., Thacker, W.E., and Miner, R.A., “Laboratory Procedures for the Measurement of Hydraulic Conductivity of Pulp and Paper Mill Sludges,” Proceedings of the Tenth Annual Madison Waste Conference, University of Wisconsin-Madison, September 1987.

Miner, R.A., Maltby, C.V., and Dell, L.R., “The Results of an Interlaboratory Study of a Column Method for Leaching Solid Wastes,”  Hazardous and Industrial Solid Waste Testing and Disposal:  Sixth Volume, ASTM STP 933, D. Lorenzen, Eds., American Society for Testing and Materials, Philadelphia, 1986.


 
WMU from A to Z

Last revision date February 11, 2014
Web site maintained by PCI 

Link to the College of Engineerings Web Site