link to Western Michigan University Home Page Link to about WMU

PDF Picture
HOME > Faculty & Staff > Paul D. "Dan" Fleming

Publications
by Paul D. "Dan" Fleming

Sooman. Lim, Margaret Joyce, Paul D. Fleming, Ahmed Tausif Aijazi and Massood Atashbar, "Inkjet Printing and Sintering of Nano Copper Ink", Journal of Imaging Science and Technology, 57 (5) Sept.-Oct. 2013

Jae Y. Shin, Nathan Jones, Paul D. Fleming, Margaret K. Joyce, Do Ik Lee, Ralph DeJong, and Steven Bloembergen, “Dynamic Water Retention Properties of Starch Latex-Containing Coating Colors”, Proceedings of PaperCon 2013, April 27-May 1, Atlanta.

Zheng Wei, Veronika Husovska, Paul D. Fleming III, Jan Pekarovic and John Cameron, “Toward Deinking of LEP Inks Printed on Different Substrates”, Proceedings of PaperCon 2013, April 27-May 1, Atlanta.

Sooman Lim, Paul D Fleming and Margaret Joyce, “A Study of the Jetting Evolution of Nano Copper Ink and Nano Silver Ink with Inkjet”, Journal of Imaging Science and Technology, 57 (2), March 2013.

Yu Ju Wu, Veronika Lovell, Alexandra Pekarovicova, Paul D. Fleming and Margaret Joyce, “Influence of Coating Pigment Porosity on Inkjet Color and Lightfastness Performance”, International Circular of Graphic Education and Research, no. 5 6-17, 2012.

Seonghyuk Ko, Paul D. Fleming, Margaret K. Joyce and Pnina Ari-Gur, “Optical and photocatalytic properties of photoactive paper with polycrystalline nano TiO2 pigment for optimal design”, TAPPI Journal, 11, p33, May, 2012.

Jae Y. Shin, Nathan Jones, Do Ik Lee, Paul D. Fleming, Margaret K. Joyce, Ralph DeJong, and Steven Bloembergen, “Rheological Properties of Starch Latex Dispersions and Starch Latex-Containing Coating Colors”, Proceedings of PaperCon 2012, April 22-25, New Orleans.

T. Chen, M. Joyce, D. Smith and P. D. Fleming, “Influencing the Inflections in Quickset Ink Setting Profiles to Improve Sheet-fed Print Quality & Efficiency”, Proceedings of PaperCon 2012, April 22-25, New Orleans

Awadhoot Shendye, Burak Aksoy, Paul D. Fleming III and Margaret Joyce, “Psychophysical tests for Visual-Numerical Correlation of Whiteness Formulas”, Proceedings of PaperCon 2012, April 22-25, New Orleans.

Sangmule S. L., Lovell V., Pekarovicova A., Fleming P. D. III, “Digital Proofing of Spot Color Overprints for Flexography”, Journal of Imaging Science and Technology, 56(1): 010507-1–010507-6, 2012.

A.S.G. Reddy, M.Z. Atashbar, M. Rebros, E. Hrehorova, B. Bazuin, Paul D. Fleming, M. Joyce “Printed capacitive based humidity sensors on flexible substrates” Sensor Letters, 9, pp. 869-871, (2011).

Sinan Sonmez, Emre Dolen, Paul D. Fleming, “Binder Effects on the Creaseability of Pigment Coated Paperboard”, Asian Journal of Chemistry, Volume 23 (2011).

Ramesh Kattumenu, Marian Rebros, Margaret Joyce, Erika Hrehorova and Paul D. Fleming, “Evaluation of Flexographically Printed Conductive Traces on Paper Substrates for RFID Applications”, TAGA J., 4, 219, 2011.

Sinan Sonmez, Paul D. Fleming, Margaret K. Joyce and Oznur Ozden, “Effects of Coat Weight and Pigment Selection on Flexographic Printability of Coated Test Liners”, Proceedings of PaperCon2010, Atlanta, May 2 - 5, 2010.

Qi Li, Kelsey Lynne Dykstra, Paul D. Fleming III, Margaret K Joyce, Dewei Qi and Pnina Ari-Gur, “The Photocatalytic Paper with Coating Formulations of Titanium Dioxide and Natural Zeolite”, Proceedings of PaperCon2010, Atlanta, May 2 - 5, 2010.

Seonghyuk Ko, Jan Pekarovic, Paul D. Fleming and Pnina Ari Gur, “High performance nano titania photocatalytic paper composite. Part I: Experimental design study for TiO2 composite sheet using a natural zeolite microparticle system and its photocatalytic property”, Materials Science and Engineering B, 166 (2010) 127-131.

Seonghyuk Ko, Pnina Ari-Gur, Margaret Joyce and Paul D. Fleming, “High performance nano titania photocatalytic paper composite. Part II: Preparation and characterization of natural zeolite-based nano titania composite sheets and study of their photocatalytic activity”, Materials Science and Engineering B, 164 (2009) 135–139.

Sindphale V., Pekarovicova A., Fleming P. D.: “Sustainable Green Inks for Flexo: Development and Printability Study”, Flexo Magazine, September 2009, 64-68.

Ramesh Kattumenu, Marian Rebros, Margaret Joyce, Paul D. Fleming and Gururaj Neelgund, “Effect of Substrate properties on Conductive Traces Printed With Silver-Based Flexographic Ink”, NPPRJ, 2009, 24, p.101-106.

Takanori Otsuhata, Paul D. Fleming, Margaret K. Joyce, “Investigation into the Coating Layer Requirements for Compatibility with Multiple Inkjet Ink Sets”, Proceedings of the TAPPI Coating and Graphic Conference, St. Louis, May 31, June 3, 2009.

Hemant Bohra, Paul D. Fleming III and Margaret K. Joyce, “Surface Energy of Coated Paper: Effect of Calendering Conditions and Relative Humidity”, Proceedings of the TAPPI Coating and Graphic Conference, St. Louis, May 31, June 3, 2009.

V. Chovancova-Lovell and P. D. Fleming III, “Color Gamut – New Tool in the Pressroom?”, TAPPI J, February 2009, pp4-11.

Peeyush Tripathi, Margaret Joyce, Paul D. Fleming and Masahiro Sugihara, “A Statistical Study of Process Variables to Optimize a High Speed Curtain Coater-Part II”, TAPPI J., February 2009, pp29-32.

Peeyush Tripathi, Margaret Joyce, Paul D. Fleming and Masahiro Sugihara, “A Statistical Study of Process Variables to Optimize a High Speed Curtain Coater-Part I”, TAPPI J., January 2009, pp20-26.

Pekarovic J., Pekarovicova A., Fleming III P. D., “Preparation of Biosilica- enriched Filler and an Example of its Use in Papermaking Retention System (Priprava biokremikom obohateneho plnidla a jeho pouzitie v papierenskom retencnom systeme)”, Papir a Celuloza, 63, 7-8, 218-222, 2008.

Yu-Ju Wu, Miro Suchy, Paul D. Fleming III and Alexandra Pekarovicova, ”Quality Analysis of Spot Color Reproduction with Inkjet Printers”, JIST, November-December, 2008, Vol. 52 (6).

Lokendra Pal, Margaret K. Joyce, Paul D. Fleming, Stéphanie A. Cretté and Charles Ruffner, “High Barrier Sustainable Co-Polymerized Coatings”, Journal of Coating Technology Research, 5 (4) 479–489, 2008.

Erika Hrehorova, Marian Rebros, Alexandra Pekarovicova, Paul D. Fleming, and Valery N. Bliznyuk, “Characterization of Conductive Polymer Inks based on PEDOT:PSS”, TAGA J. 4, 219 (2008).

Renmei Xu, Yu Ju Wu, Alexandra Pekarovicova, Paul D. Fleming and Michelle X. Wang, “The Effects of paper Coating on Gravure Ink Mileage”, TAGA J. 4, 119 (2008).

Yu Ju Wu, Alexandra Pekarovicova and Paul D. Fleming, “The Effect of Paper Properties on the Color Reproduction for Digital Proofing of Gravure Publication Printing”, TAGA Journal, 4(2), 72-83 (2008).

Renmei Xu, Alexandra Pekarovicova, Paul D. Fleming, and Valery Bliznyuk, "Physical Properties of LWC Papers and Gravure Ink Mileage"TAPPI J., December 2007 p 27..

Paul D. Fleming III, Bradley Bazuin, Marian Rebros, Erika Hrehorova, Margaret K. Joyce, Alexandra Pekarovicova, and Valery Bliznyuk, "Printed Electronics at Western Michigan University"invited paper in Proceedings of the AIChE’s 2007 Annual Meeting, November 4-9, 2007, Salt Lake City.

Erika Hrehorova, Alexandra Pekarovicova, V.N. Bliznyuk, and Paul D. Fleming, "Polymeric Materials for Printed Electronics and Their Interactions with Paper Substrates"Proceedings of IS&T Digital Fabrication 2007, Anchorage, September 16-21, 2007.

Laura Kraft, Kate Blout, and Paul D. Fleming III, "Process Color Profiling: Syncing a Digital Press with an Offset Press"Proceedings of IS&T NIP23: International Conference on Digital Printing Technologies, Anchorage, September 16-21, 2007.

Yu-Ju Wu, Paul D. Fleming III and Alexandra Pekarovicova"Color Matching Capability of Digital Printers"Proceedings of IS&T NIP23: International Conference on Digital Printing Technologies, Anchorage, September 16-21, 2007.

Steven D. Rice and Paul D. Fleming III"Lightfastness Properties of Different Digital Printers and Papers"Proceedings of IS&T NIP23: International Conference on Digital Printing Technologies, Anchorage, September 16-21, 2007.

Lokendra Pal, Sachin Agate and Paul D. Fleming"Effects of Paper Manufacturing Factors on Inkjet Print Quality and Lightfastness"Proceedings of IS&T NIP23: International Conference on Digital Printing Technologies, Anchorage, September 16-21, 2007.

Reem El Asaleh and Paul D. Fleming III"Cross Platforms Display Calibration and Profiling (MacOs and Windows)"Proceedings of IS&T NIP23: International Conference on Digital Printing Technologies, Anchorage, September 16-21, 2007.

Peeyush Tripathi, Margaret Joyce, Do Ik Lee, Paul D. Fleming and Masahiro Sugihara, "Comparison of the Surface and Print Quality of Curtain and Blade Coated Papers"TAGA Journal VOL. 3, 2003-2013 (2007).

Mario A Cruz, Margaret Joyce, Paul D. Fleming, Marion Rebros, Alexandra Pekarovicova, "Surface Topography Contribution to RFID Tag Efficiency Related To Conductivity",Proceedings of the TAPPI Coating and Graphics Arts Conference, Miami, April 22-25, 2007.

Erika Hrehorova, Marian Rebros, Alexandra Pekarovicova, Paul D. Fleming, and Valery N. Bliznyuk, "Characterization of Conductive Polymer Inks based on PEDOT: PSS"Proceedings of the 59th TAGA Annual Technical Conference, Pittsburgh, March 2007.

RuRou Mai, Alexandra Pekarovicova and Paul D. Fleming III, "Correlation between ink rheology and press performance of water-based flexographic inks"Proceedings of IS&T Digital Fabrication 2007, Anchorage, September 16-21, 2007.

Yu Ju Wu, Alexandra Pekarovicova and Paul D. Fleming, "The effect of paper properties on the color reproduction for digital proofing of gravure publication printing"Proceedings of IS&T Digital Fabrication 2007, Anchorage, September 16-21, 2007.

Renmei Xu, Yu Ju Wu, Alexandra Pekarovicova, Paul D. Fleming, Xiao-Qin Wang, "The Effects of Paper Coating on Gravure Ink Mileage Behaviors"Proceedings of IS&T Digital Fabrication 2007, Anchorage, September 16-21, 2007.

Mario A Cruz, Margaret Joyce, Paul D. Fleming, Roy Rosenberger, "Comparative Study: Verity IA Topography, Emveco, and Parker Print Surf", Proceedings of the TAPPI Papermakers & PIMA International Leadership Conference, Jacksonville, March 11-15, 2007.

Veronika Chovancova-Lovell, Paul D. Fleming III, Ben Starr and Abhay Sharma, "CRT and LCD Monitors for Soft Proofing", TAGA J., 3, 2007.

Veronika Chovancova-Lovell, Alexandra Pekarovicova and Paul D. Fleming III, “Novel Phase Change Inks for Printing 3D Structures”, JIST, 50(6): 550–555, November-December 2006.

Jan Pekarovic, Alexandra Pekarovicova and Paul Daniel Fleming III, “Two-step straw processing – a new concept of silica problem solution”, Proceedings of the TAPPI Engineering, Pulping & Environmental Conference, Atlanta, November 5-8, 2006.

Lokendra Pal, Margaret K. Joyce and P. D. Fleming, “A Simple Method for Calculation of Permeability Coefficient of Porous Media”, TAPPI J., September 2006, p 10.

Yu Ju Wu, Miro Suchy, Paul D. Fleming III and Alexandra Pekarovicova, “Quality Analysis of Spot Color Reproduction with an Inkjet Printer”, Proceedings of the IS&T NIP22: International Conference on Digital Printing Technologies, Denver, September 17-22, 2006.

Veronika Chovancova-Lovell and Paul D. Fleming III, “Effect of Optical Brightening Agents and UV Protective Coating on Print Stability of Fine Art Substrates for Ink Jet”, Proceedings of the IS&T NIP22: International Conference on Digital Printing Technologies, Denver, September 17-22, 2006.

Erika Hrehorova, Alexandra Pekarovicova and Paul D. Fleming, “Gravure Printability of Conductive Polymer Inks”, Proceedings of IS&T Digital Fabrication 2006, Denver, September 18-23, 2006.

Peeyush Tripathi, Margaret Joyce and Paul D. Fleming, “New Curtain Coating Technology Offers Benefits for Barrier Coated Grades”, TAPPI Solutions, 89(7), July 2006.

Jan Pekarovic, Alexandra Pekarovicova and Paul D. Fleming, “Preparation of Biosilica-Enriched Filler and its Use in Nano-Particle Retention System”, Proceedings of the TAPPI 2006 International Conference on Nanotechnology, 4/26-28, Atlanta.

Marian Rebros, Paul D. Fleming and Margaret K. Joyce, “UV-Inks, Substrates and Wetting”, Proceedings of the 2006 TAPPI Coating & Graphic Arts Conference, April 24-27, Atlanta.

Peeyush Tripathi, Margaret Joyce, Do Ik Lee, Paul D. Fleming and Masahiro Sugihara, “A Study for the Statistical Optimization of a High Speed Curtain Coater”, Proceedings of the 2006 TAPPI Coating & Graphic Arts Conference, 4/24-27, Atlanta.

Erika Hrehorova, Abhay Sharma and Paul D Fleming III, “Color Reproduction Studies in RGB and CMYK Workflows using Inkjet Printer Drivers and RIPs”, Proceedings of the 58th TAGA Annual Technical Conference, Vancouver, British Columbia, March 2006.

Yu Ju Wu, Miro Suchy, Paul D. Fleming III and Alexandra Pekarovicova, “Digital Proofing of Spot Color Printing”, Proceedings of the 58th TAGA Annual Technical Conference, Vancouver, British Columbia, March 2006.

Renmei Xu, Alexandra Pekarovicova, Paul D. Fleming and Xaio Wang, “Study of Ink Mileage Curve of Gravure Printing”, Proceedings of the 58th TAGA Annual Technical Conference, Vancouver, British Columbia, March 2006.

RuRou Mai, Alexandra Pekarovicova, and Paul D. Fleming III, “Rheology Modifiers in Water-based Rotogravure Inks”, Proceedings of the 58th TAGA Annual Technical Conference, Vancouver, British Columbia, March 2006.

Veronika Pekarovicova, Alexandra Pekarovicova, and Paul D. Fleming III, “Shrink Sleeve Flexo Inks”, Proceedings of the 58th TAGA Annual Technical Conference, Vancouver, British Columbia, March 2006.

Lokendra Pal and Paul D. Fleming, “The Study of Ink Pigment Dispersion Parameters”, The Hilltop Review, 2, 61 (2006).

Andrea Frimova, Alexandra Pekarovicova, Paul D. Fleming III and Jan Pekarovic, “Ink Stability During Printing”, TAGA J., 2, 121, December 2005.

Renmei Xu, Paul D. Fleming III, Alexandra Pekarovicova, and Valery Bliznyuk, “The Effect of Ink Jet Papers Roughness on Print Gloss and Ink Film Thickness”, J. Imaging Sci. Technol. , 49 (6), November/December 2005, 660-665.

Veronika Chovancova, Paul Howell, Paul D. Fleming III and Adam Rasmusson, “Color and Lightfastness of Different Epson Ink Jet Ink Sets”, J. Imaging Sci. Technol., 49 (6), November/December 2005, 652-659.

Miro Suchy, Paul D. Fleming III and Abhay Sharma, “Spot Color Reproduction with Digital Printing”, Proceedings of the IS&T NIP21: International Conference on Digital Printing Technologies , Baltimore, 2005, 93-97.

Veronika Chovancova, Alexandra Pekarovicova and Paul D. Fleming III , “Hot Melt Inks for 3D Printing”, Proceedings of IS&T Digital Fabrication 2005 , Baltimore, 2005, 143-147.

Hrehorova, E., Wood ,, L. K., Pekarovic, J., Pekarovicova, A., Fleming, P. D. , and Bliznyuk, V., “The Properties of Conducting Polymers and Substrates for Printed Electronics”, Proceedings of IS&T Digital Fabrication 2005 , Baltimore, 2005, 197-202.

Wood, L., Hrehorova, E., Joyce, T., Fleming, P. D. , Joyce, M. K., Pekarovicova A. and Bliznyuk, V. “Paper Substrates and Inks for Printed Electronics”, Pira Ink on Paper Symposium , Atlanta , September 28, 2005.

Veronika Chovancova, Alexandra Pekarovicova and Paul D. Fleming III , “Production of 3D Structures in Printing”, Proceedings of the 57 th TAGA Annual Technical Conference, Toronto, Ontario, April 2005, 93-94.

Adam Rasmusson, Veronika Chovancova, Paul D. Fleming III and Alexandra Pekarovicova, “Light Fastness of Pigment-based and Dye-based Inkjet Inks”, Proceedings of the 57 th TAGA Annual Technical Conference, Toronto, Ontario, April 2005, 43-44.

Erika Hrehorova, Alexandra Pekarovicova, and Paul D. Fleming , “Spot Color Consistency for Product Gravure” , Proceedings of the 57 th TAGA Annual Technical Conference, Toronto, Ontario, April 2005.

Kudzai Chigogora, Paul D. Fleming III and Abhay Sharma, “Optimizing Proofing in a Digital Work Flow”, Proceedings of the 57 th TAGA Annual Technical Conference, Toronto, Ontario, April 2005.

Renmei Xu, Alexandra Pekarovicova, Paul D. Fleming , and Valery Bliznyuk , “Physical Properties of LWC Papers and Gravure Ink Mileage”, Proceedings of the 2005 TAPPI Coating & Graphic Arts Conference , April 17-20, in Toronto, ON, Canada.

Hyun-Kook Lee, Margaret K. Joyce, Paul D. Fleming, and James E. Cawthorne, “Influence Of Silica and Alumina Oxide On Coating Structure and Print Quality Of Ink Jet Papers”, TAPPI Journal, 4, 11-16 (2005).

Hyun-Kook Lee, M. K. Joyce, and Paul D. Fleming, “Influence of Pigment Particle Size and Pigment Ratio on Printability of Glossy Inkjet Paper Coatings”, JIST, 49, Number 1, January/February 2005, pp54-60.

Veronika Chovancova, Paul Howell, Paul D. Fleming III and Adam Rasmusson, “Printability of Different Epson Ink Jet Ink Sets”, Proceedings of the IS&T NIP20: International Conference on Digital Printing Technologies, Salt Lake City , 2004.

Renmei Xu, Paul D. Fleming III and Alexandra Pekarovicova, “The Effect of Ink Jet Papers Roughness on Print Gloss and Ink Film ThicknessProceedings of the IS&T NIP20: International Conference on Digital Printing Technologies, Salt Lake City , 2004.

Hyun-Kook Lee, M. K. Joyce, and Paul D. Fleming, “Influence of Pigment Particles on Gloss and Printability for Inkjet Paper Coatings”, Proceedings of the IS&T NIP20: International Conference on Digital Printing Technologies, Salt Lake City, 2004.

Paul D. Fleming , “Printing”, Encyclopedia of Forest Sciences, Jeffery Burley Editor, Volume 2, pp678-686, Elsevier Academic Press, Oxford 2004.

Xiaoying Rong, Paul D. Fleming, and Abhay Sharma, “Quantitative Analysis of ICC Profile Quality for Scanners”, Proceedings of the 56th Annual TAGA Technical Conference, New Orleans , LA , April 2004.

Paul D. Fleming, J. Dollak, and S. Fryzlewicz, “Stochastic Screening using Photoshop: What to do when your RIP doesn't Support It”, J. Graphic Technology, 3, 15 (2004).

Paul D. Fleming, H. Jewell and Aniruddha D. Khandekar, “The Leverage of Gray Balance in Controlling Perceptual and Quantitative Colorimetry”, J. Graphic Technology, 3, 43 (2004).

Paul D. Fleming III, Veronika Chovancova, Ben Starr and Abhay Sharma, “CRT and LCD Monitors for Soft Proofing”, Proceedings of the 55th Annual TAGA Technical Conference, Montreal, Quebec, Canada, April 6-9, 2003.

Paul D. Fleming , James E. Cawthorne, Falguni Mehta, Saurabh Halwawala and Margaret K. Joyce, “Interpretation of Dot Area and Dot Shape based on Image Analysis”, Journal of Imaging Science and Technology, 47, 394 (2003).

Hyun-Kook Lee, M. K. Joyce, and Paul D. Fleming, “Influence of Pigment Particle Size and Packing Volume on Printability of Glossy Inkjet Paper Coatings”, Proceedings of the IS&T NIP19: International Conference on Digital Printing Technologies, New Orleans, October 2003, pp613-618

Burak Aksoy, Margaret K. Joyce and Paul D. Fleming, “Comparative Study of Brightness/Whiteness Using Various Analytical Methods on Coated Papers Containing Colorants”, Proceedings of the TAPPI Spring Technical Conference & Trade Fair, Chicago, May 2003.

Burak Aksoy, Margaret K. Joyce and Paul D. Fleming, “Exploring Myths of Measured and Perceived Whiteness”, In review for JOSA A.

Burak Aksoy, Paul D. Fleming, Margaret K. Joyce and Abhay Sharma, “New Measures Of Whiteness That Correlate With Perceived Color Appearance”, in Review for JOSA A .

Burak Aksoy, Paul D. Fleming and Margaret K. Joyce, “Whiteness Evaluations On Tinted And FWA Added Papers”, in Review for JOSA A.

Burak Aksoy, Margaret Joyce, and Paul D. Fleming III, “Effect Of Zirconium Insolubilizers On Silica Coating Rheology”, J. Coating Technology, in press.

James E. Cawthorne, Margaret Joyce and Paul D. Fleming, “Use of A Chemically Modified Clay As A Replacement For Silica In Matte Coated Ink Jet Papers”, J. Coat. Tech, , 75, No. 937, pp 75-81, Feb. 2003.

Alexandra Pekarovicova, Hrishikesh Bhide, Paul D. Fleming III, and Jan Pekarovic, “Phase Change Inks”, J. Coat. Tech, , 75, No. 936, pp 65-72, Jan. 2003.

Abhay Sharma and Paul D. Fleming, “Measuring the Quality of ICC Profiles and Color-Management Software”, Seybold Report, Vol. 2, No. 19 January 13, 2003.

Hyun Kook Lee, Margaret K. Joyce, Paul D. Fleming and, John Cameron, “Production of a Single Coated Glossy Inkjet Paper Using Conventional Coating and Calendering Methods”, Proceedings of the TAPPI Coating Conference, May 2002.

Paul D. Fleming, James E. Cawthorne, Falguni Mehta, Saurabh Halwawala and Margaret K. Joyce, “Interpretation of Dot Area and Dot Shape based on Image Analysis", Proceedings of the IS&T NIP18: International Conference on Digital Printing Technologies , San Diego, October 2002.

Paul D. Fleming and Abhay Sharma, "Color Management and ICC Profiles; Can’t Live Without It So Learn To Live With It!”, Gravure Magazine, August 2002, p56.

Abhay Sharma and Paul D. Fleming, “Evaluating the Quality of ICC Color Management Profiles”, Proceedings of the 2002 TAGA Annual Technical Conference, Ashville, NC, April 14-17, 2002, p336.

Peter E. Parker, Paul D. Fleming, Steve Beyerlein, Dan Apple and Karl Krumsieg, “SII Assessments as Tools for Continuous Improvement of Learning Skills”, Proceedings of the 31st ASEE/IEEE Frontiers in Education Conference, Oct. 10-13, 2001, Reno.

Chandra Duraiswamy, Thomas W. Joyce, Margaret K. Joyce and Paul D. Fleming, “Effects of Starch Type on the Silicone Holdout of Release Papers”, TAPPI J., Peer Reviewed Paper, March 2001, 84, No. 3.

Dewei Qi, Paul D. Fleming and Margaret Joyce, “Analysis of Microstructure of Coating Suspensions” Int. J. Powder Technology 104 50 (1999)

Dewei Qi, Paul D. Fleming and Margaret Joyce, “Numerical Experiments of Microstructure of Coating Particles”, Proceedings of the TAPPI Coating/Papermaking Conference, p51, May 1998.

D. R. Wiff, G. M. Lenke and P. D. Fleming, “Polycarbodiimide/Cyanate and Polyimide/Cyanate Thermoset In-Situ Molecular Composites”, J. Mat. Res., 13, No. 7, 1, Jul. (1998)

O. H. Yeoh and P. D. Fleming, “A New Attempt to Reconcile the Statistical and Phenomenological Theories of Rubber ElasticityJ. Pol. Sci. B: Pol. Phys., 35, 1919 (1997)

S. Misra, P. D. Fleming, and W. Mattice, “Structure and Energy of Thin Films Poly(1,4-cis-butadiene): A New Atomic Approach”, J. Comp. Aided Mol. Des. 2 (1995).

D. Wiff, G. Lenke, and P. D. Fleming, “In Situ Thermostat Molecular Composites”, J. Pol. Sci. B: Pol Phys. 32, 2555, (1994).


 
WMU from A to Z

Last revision date March 25, 2014
Web site maintained by PCI 

Link to the College of Engineerings Web Site