link to Western Michigan University Home Page Link to about WMU

HOME > Faculty & Staff > John Cameron




Publications
by John Cameron

Heat Transfer and Drying

Alkhasawneh H., Cameron J., AbuBaker S., "The Effect of Fractionation on the Drying Behavior of Recycled Fibders", Progress in Paper Recycling, Vol. 16, No. 2, (February 2007)

John Cameron and Theodore Zwick, “Effect of Fiber Recycling on Paper Drying” TAPPI Spring Technical Conference, Chicago, Ill (May 12-16, 2003).

Biljana Bujanovic and John Cameron, “Effect of Sodium Metaborate on the Boiling Point Rise of Slash Pine Black Liquor”, Ind. Eng. Chem. Res., 40(11), 2518-2524 (May, 2001).

B. Bujanovic and J. Cameron, “Effects of Borate Autocausticizing on the Solubility of Black Liquor Components and the Associated Boiling Point rise”, International Chemical Recovery Conference, Whistler, British Columbia, Can (June 11-14, 2001).

J. Cameron and P. Tripathi, “Measurement of Paper-Shell Contact Coefficients", 12th International Drying Symposium, Noordwijkerhout, The Netherlands, (Aug 28, 2000).

John H. Cameron and Jeromy Timmer, “Development of Experimental Techniques and Measurement of Paper-Shell Contact Coefficient”, AIChE Symposium Series, No. 324, Vol. 96, pp71-76. (2000).

B. Bujanovic and J. Cameron, “ Effect of Borate on Black Liquor Boiling Point Rise, 2000 AIChE Annual Meeting, Los Angles, CA (Nov 12-17, 2000).

J. Cameron, and Tripathi Peeyush, “Laboratory Methods for Determining Paper-Shell Contact Coefficients”, 2000 AIChE National Meeting, Atlanta, Georgia, (March, 2000).

J. Cameron, and Jeromy Timmer, “Development of Experimental Techniques and Measurement of Paper-Shell Contact Coefficient during Paper Drying, AIChE Annual Meeting, Dallas, TX., (Nov 1999).


Pulping

Biljana Bujanovic, John Cameron PARTIAL BORATE-BASED AUTOCAUSTICIZING IN KRAFT PROCESS: MECHANICAL PROPERTIES OF KRAFT AND KRAFT-BORATE PULPS Wood Processing/Prerada Drveta, ISSN 145-401X, God. IV Br. 14, Page 3, (April-June 2006)

Bujavonic B., Yilgor N., Cameron J., and Raja Arvamuthan, "Chemical Characterization of Birch, Maple and Spruce Kraft and Kraft-Borate Pulps", Jornal of Pulp and Paper Science, Vol 30, No. 7, pp 183-190 (July 2004)

Bujavonic B., Cameron J., and Yilgor N., "Some Properties of Kraft and Kraft-Borate Pulps of Different Wood Species" , TAPPI Journal, Vol 3: No. 6, (June 2004)

J. Cameron, "Mechanical Pulping", Encyclopedia of Forest Sciences, Elsevier Oxford, UK (April 2004)

Bujavonic B., Schoffers E., Cameron J., "Residual Lignin of Spruce Kraft and Kraft-Borate Pulps", 12th International Symposium on the Wood and Pulping Chemistry, Madison Wisconsin, (June 2003)

B. Bujanovic, J.H. Cameron and N. Yilgor, “Comparative Studies of Kraft and Kraft-Borate Pulping of Black Spruce”, Journal of Pulp and Paper Science, Vol. 29, No. 6 (June 2003).

J. Genco, J. Cameron, B. Bujanovic, and C. Bair, “Effect of Borate Autocausticizing on Kraft Pulping, 2001 TAPPI Pulping Conference, Seattle, WA. (Nov 4-7, 2002).

J. Cameron, and Z Yusuf, “Decarbonizing Sodium Carbonate with Sodium Metaborate, 2001 TAPPI Pulping Conference, Seattle, WA. (Nov 4-7, 2001).

J. Cameron, D. Hebner, and R. Aravamuthan, “Effect of Borate on Semi-Chemical Pulping”, Proceedings 1997 AIChE Annual Meeting, Los Angles, CA, Nov. 16, (1997).


Recycling

John Cameron, INGEDE Method 11 applied at Western Michigan University, Round Table on Deinking of Digital Prints, Perlen Paper AG, Switzerland February 15, 2011

Paul D. Fleming III, John Cameron and Jan Pekarovic, “Assessment of INGEDE Method in Different Laboratories and Protocol Modifications”, Proceedings of 63rd Annual Technical Conference, Pittsburgh,March 6-9, 2011.

Alvaro Buitrago, Jan Pekarovic, John Cameron, and Paul D. Fleming III, “Assessment of INGEDE Method in Different Laboratories and Protocol Modifications”, Proceedings of the 241st ACS Spring Meeting in Anaheim, California (March 27-31, 2011).

D. Peterson, S. Zhang, D. Qi and John Cameron, "An Effective Method to Produce High Quality Fiber Fines", Progress in Paper Recycling, Vol. 10 No. 3, 18-24, (May 2001).

J. Cameron, and William Forester, Behavior of PSA’s: MOW and Sorted Office Paper with High Content of PSA’s, Recycling Symposium Technical Program, (March, 2000).

W. Forester, and J. Cameron, “Rejects Handling”, Paper Recycling Challenge, Vol. III Process Technology, Progress in Paper Recycling, August (1998).


Wood Chemistry

Bujanovic, B., Schoffers, E, Cameron, J. (2003): “Residual Lignin of Spruce Kraft and Kraft-Borate Pulps”, 12th International Symposium on the Wood and Pulping Chemistry, Madison Wisconsin, (June 2003)

J. Cameron, Q. Zhou, C. Longcore, and R. Aravamuthan, “Effect of Borate and Boric Acid on Brightness Reversion of Lignin Containing Pulps”, AlChE Symposium Series No. 322, Vol. 95, (1999).

Joseph Mikowski and J. Cameron, “Effect of Fillers on Color Reversion of CTMP, 2002 TAPPI Paper Summit, Atlanta, GA (Mar 3-6, 2002).

J. Cameron, R. Aravamuthan, Q. Zhou, and C. Longcore, “Use of Boron Compounds to Reduce Photoyellowing of High Yield Pulps”, 1999 Tappi, Pulping Conference, Orlando FL., (Nov. 1999).

J. Cameron, Qilin Zhou and Chad Longcore, Effect of Borate and Boric Acid on Photoyellowing of Mechanical Pulps, 1998 AIChE Meeting, Miami, FL, Nov.18, (1998)


Chemical Kinetics

Zaki Y. and Cameron J., "Decarbonization Reactions between Sodium Metaborate and Sodium Carbonate", Ind. Eng. Chem. Res, 43, 8143-8154, (Nov. 2004).

Z. Yusuf and J. Cameron, “The Reaction between Sodium Carbonate and Sodium Metaborate in Both Solid and Liquid States”, International Chemical Recovery Conference, Whistler, British Columbia, Can (June 11-14, 2001).

Z. Yusuf and J. Cameron, “Autocausticizing Sodium Carbonate with Borate”, 2000 AIChE Annual Meeting, Los Angles, CA (Nov 12-17, 2000).

Cameron, J. H., Clay, D. T., and Grace, T. M., “Role of Sulfate-Sulfide Cycle in Char Burning – Experimental Results and Implications”, TAPPI Energy and Management, 435-440, (1991).

Cameron, J. H, “Reactions of Hydrogen with Alkali Carbonate/Sulfate Smelt” AIChE Forest Products Division Symposium Series, (1989).

Goerg, K. A., and Cameron J. H., “A kinetic Study of kraft Char Gasification with Carbon Dioxide”, AlChE Forest Products Division Symposium Series, (1988).

Aiken, G. W., and Cameron, J. H., “Carbon Monoxide/Carbon Dioxide Ratio of Char Burning”, AlChE Forest Products Division Symposium Series, (1988).

Maule, Greg P. and Cameron, John H., “Reaction of Na2CO3 Fume Particles with SO2 and O2”, Institute of Paper Chemistry Technical Paper Series No. 317, IPST, Atlanta, (1988).

Cameron, John H., “Reactions of Hydrogen with Alkali Carbonate/Sulfate Smelt”, Institute of Paper Chemistry Technical Paper Series No. 315, IPST, Atlanta, (1988).

Cameron, John H. "Reaction Enhanced Vaporization of Molten Salt", Chem. Eng. Comm., Vol. 59, pp. 243257, (1987).

Cameron, John H., "Oxidation of Kraft Char in an Alkali Carbonate Melt", Ind. Eng. Chem. Fundam., Vol. 2G, No. 8, (1987).

Aiken, G.W. and Cameron, J.H., "A Study of the Factors Affecting the Carbon Monoxide/Carbon Dioxide Ratio in the Exhaust Gases of a Fixed-Bed Reactor," AlChE Summer National Meeting, Paper No. 33e, Minneapolis, (1987).

Grace, T.M. and Cameron, J.H., "A Kinetic Study of Kraft Char Gasification with Carbon Dioxide", Annual AlChE Meeting, Boston, (1986).

Cameron, J. H., Clay, D. T., and Grace, T. M., “Oxidative Fuming - The Phenomenon and Interpretations”, Proceedings of the 1985 International Conference on Recovery of Pulping Chemicals", Vol. 3, p. 435, (1985).

Grace, T.M., Cameron, J.H., and Clay, D.T., "Role of the Sulfate/Sulfide Cycle in Char Burning-Experimental Results and Implications", Proceedings of the 1985 International Conference on Recovery of Pulping Chemicals", Vol. 3, p. 371, (1985).

Sjoberg, M. and Cameron, J.H., "A Kinetic Study of Sulfate Reduction by Carbon Monoxide", AlChE Forest Products Division Symposium Series, No. 239, Vol., 80, pp. 35-40. (1984).

Cameron, J.H. and Grace T.M., "Sulfate Reduction with Carbon", Ind. Eng. Chem. Fundam., Vol. 22, p. 486 (1983)

Cameron, J.H. and Grace, T.M. "Sulfate Reduction with Carbon is Strongly Influenced by Bed Surface Temperature", TAPPI, Vol. 65, No. 7 (1982).

Cameron, J.H., Kleinhenz, T.A., and Hawley, M.C. "Kinetics of Hydrolysis of Phenyltrichloro-silane", Ind. Eng., Fundam., Vol. 14, No. 4 pp. 328-333 (1975)


Chemical Recovery

N. Yilgor, B. Bujanovic, and J. Cameron, "Using of Borates in Pulping Industy", Proceedings of 3rd International Boron Symposium, pp 65-70 Ankara Turkey, (November 2006)

John Cameron, Murugavel Anbalagan, and Subbaiyan Pasupathy Rajan, “Effect of Partial Borate Autocausticizing on Causticizing Rate and Equilibrium” TAPPI Fall Technical Conference, San Diego, CA (Sept 8-11, 2002).

Biljana Bujanovic, Nural Yusuf and John Cameron “Properties of Kraft and Kraft-Borate Pulps” TAPPI Fall Technical Conference, San Diego, CA (Sept 8-11, 2002).

Cameron, John, “Use of Borate Autocausticizing to Reduce Lime Kiln Energy Usage”, Reducing Costs and Increasing Profitability in the Paper Industry’ – A Two Day International Conference, pira, Manchester, UK. (June 26th to June 27th 2001).

H Tran, J. Cameron, and C Bair, “Autocausticizing of Kraft Smelt with Sodium Borates”, Pulp and Paper Canada (September1999).

J. Cameron and Goerg-Wood, “Combustion of High Inorganic Content Fuels, J. Fuel Processing Technology (May 1999).

Goerg-Wood, and J. Cameron, “A Study of Fume Particle Deposition”, AlChE Forest Products Division Symposium Series – Oct (1998).

H. Tran, J. Cameron, and C. Bair, “Autocausticizing of Kraft Smelt with Sodium Borates”, Proceeding of International Chemical Recovery Conference, Tampa, FL, June (1998).

Goerg-Wood, and J. Cameron, “A Study of Fume Particle Deposition”, Proceedings AIChE Annual Meeting, Los Angles, CA, Nov. 16, (1997).

Cameron, J. H. , Goerg, K. A., and Grace, T. M. “Mechanism and Rates of Recovery-Boiler Fume Deposition”, IPST Tech. Pap. Ser. No. 461:21 p (Jan, 1993).

Cameron, J.H., Clay, D. T., and Grace, T. M., “Sulfate-Sulfide Char Burning” TAPPI Kraft Recovery Operations Short Course (Orlando) Notes: 153-161 (Jan 8, 1990).

Crowe, D. C. and Cameron, J. H., “New Mechanism of Recovery Boiler Air Port Corrosion”, Institute of Paper Chemistry Technical Paper Series No. 299, IPST, Atlanta, (1988).

Cameron, John H., "Vaporization from Alkali Carbonate Melts with Reference to the Kraft Recovery Furnace”, J. Pulp and Paper Science, Vol. 14, No. 4, July (I988).

Cameron, John H. “Fuming in Recovery Boilers”, International Colloquium on High Temperature Research Related to Black Liquor Combustion, Pulp and Paper Centre, University of Toronto, Hamer Bay, Ontario, pp 29-30, (Nov. 1987)

Grace, T.M., Cameron, J.H., and Clay, D.T., "Role of Sulfate-Sulfide Cycle in Char Burning", TAPPI, Vol. 69, No. 10, (1986).

Cameron, J.H. and Grace T.M. "Sulfate Reduction with Kraft Black Liquor Char", Ind. Eng. Fundam., 24(4) p 443,(1985).


Invited Journal Publications

J. Cameron and W. Forester, “Stickies Determination”, Paper Age, August (1998).

Cameron, John H., "Making Book on Permanent Paper", Chapter One, AlChE Magazine for Students. Fall (1989).

Cameron, John H., "Fume Generation in Kraft Recovery Boilers", PIMA, 68 (3) p 32, (1986).


Other Technical Presentations

Effect of Fines on Recycled Fiber Properties, AF&PA Annual Meeting Container Group, Temple, AZ, March 10-12, (1999)

Partial Autocausticizing with Borate, AF&PA Poster Session on New Technology, Chicago, IL, Dec (1998).

Effect of Borate on Photoyellowing of Semi-Chemical Pulps, given at U. S. Borax sponsored Colloquium on the Use of Borate in the Paper Industry, Rothbury, Mich., August 4 - 6, 1997.

Use of Borate in Semi-Chemical Pulping, given at U. S. Borax sponsored Colloquium on the Use of Borate in the Paper Industry, Rothbury, Mich., August 4 - 6, 1997.

Fuming in Recovery Boilers, International Colloquium on High Temperature Research Related to Black Liquor Combustion, Pulp and Paper Centre, University of Toronto, Hamer Bay, Ontario, (Nov. 1987)

 
WMU from A to Z

Last revision date February 11, 2014
Web site maintained by PCI 

Link to the College of Engineerings Web Site