Office of Information Technology
WMU Home About WMU Academics Admissions Student Life Alumni and Friends
   

WMU > OIT > Help Desk > Telephones

Programming a Phone Card on a Single Line Plus Phone

  1. Lift handset.
  2. Press and release the "STORE" button (1).
  3. Dial 9 followed by the phone card's 1-800 number.
  4. Press and release the desired memory location button (2).
  5. Hang up or depress the "FLASH" button (3).
  6. Lift handset.
  7. Press and release the "STORE" button (1).
  8. Dial the (generally) 12-digit phone card PIN number.
  9. Press and release the desired memory location button (2).
  10. Hang up.

Note: your actual phone may not be identical to that shown, however your buttons should be similarly labeled.

Single Line Plus Phone

Using the stored numbers

  1. Lift handset.
  2. Press the memory location button you used to store the card's 1-800 number.
  3. When requested to enter the card number, press the memory location button where that was stored.
  4. When requested, dial the long distance number you are calling, beginning with the area code.

 

 
 
Office of Information Technology, Western Michigan University, Kalamazoo, Michigan, 49008-5206
Phone (269) 387-5430 | Contact OIT | Last Updated: February 29, 2008
Report Copyright Infringements
Western Michigan University Student Information System Western Michigan University