WMU > OIT > Faculty & Staff > E-mail > GroupWise

Download the GroupWise Client for Windows® and Linux

To use the new GroupWise 7.0.1 client for Windows®, you must first download and execute the GroupWise 7.0.1 client. This will take about 5 minutes with a 100M connection. (NOTE: It is not recommended that you download this client over a 56K modem connection. If you have only a modem connection, you may obtain a CD containing the client executables from the Help Desk.) After it finishes, download and execute the GW7.0.1 Post Install Setup, which takes a few seconds. Finally, verify you can log into your GroupWise account.

Persons downloading the client for Linux should follow normal installation procedures for the Linux platform. There is no post install setup to download for this platform.

• Download the GroupWise 7.0.1 Client for Windows®
• Download the GW7.0.1 Post Install Setup (Windows® only)
• Download the GroupWise 7.0.1 Client for Linux Cross-Platform

Need More Help?

If you need assistance, the Help Desk is located down the hall at the end of the UCC lab. They may be reached by telephone at (269) 387-HELP, option 1, or by e-mail to .