- Home
- Brochure
- Equipment
- Furukawa Laser
- Micro Laser Assisted Machining
- Micro tribometer
- Mitutoyo Surftest SJ-401 Surface Profilometer
- Nano-Cut Device
- Nikon Optical Microscope
- S-4500 Hitachi Ultra High Resolution Scanning Electron Microscope (SEM)
- Thermal Evaporator
- Type 9256A Kistler
- Visotek DL-10 Diode Laser
- WYKO Rough Surface Tester White Light Interferometer
- YLR-100-AC IPG Photonics Laser
- Zeiss Axiovert 100M Confocal Laser Scanning Microscope (LSM)
- Publications
- Presentations
- Projects
- Upcoming Conferences
- People
- Research Partners
Type 9256A Kistler 3-Component Mini Dynamometer with Type 5010 Dual Mode Charge Amplifier
Type 9256A Kistler 3-Component Mini Dynamometer Fixed
to a Machine Table1
The Type 9256A Kistler 3-Component Dynamometer is screwed onto the machine table of a machine tool to measure the machining forces in the X, Y, and Z directions as shown above. The workpiece to be machined is fixed to the cover plate. A Type 5010 Dual Mode Charge Amplifier, shown below, is used to transfer the signal to the computer using a DynoWare - data acquisition software to display results1.
Type 5010 Dual Mode Charge Amplifier
Technical Data and General Specifications of Type 9256A Kistler 3-Component Dynamometer1
| Parameter | Data | |
| Measuring Range | Fx, Fy, and Fz | From -250 N to 250 N |
| Threshold | 1.8 mN | |
| Sensitivity | Ex and Ez Ey |
-11pC/N -13pC/N |
| Rigidity | Cx Cy Cz |
250 N/μm 300 N/μm 290 N/μm |
| Dimensions | 80x75x25 mm | |
| Natural Frequency | Fox, Foy, and Foz | >5kHz |
| Working Piece Clamping Area | 40x80 mm |
