- Home
- Brochure
- Equipment
- Furukawa Laser
- Micro Laser Assisted Machining
- Micro tribometer
- Mitutoyo Surftest SJ-401 Surface Profilometer
- Nano-Cut Device
- Nikon Optical Microscope
- S-4500 Hitachi Ultra High Resolution Scanning Electron Microscope (SEM)
- Thermal Evaporator
- Type 9256A Kistler
- Visotek DL-10 Diode Laser
- WYKO Rough Surface Tester White Light Interferometer
- YLR-100-AC IPG Photonics Laser
- Zeiss Axiovert 100M Confocal Laser Scanning Microscope (LSM)
- Publications
- Presentations
- Projects
- Upcoming Conferences
- People
- Research Partners
Nikon Optical Microscope with OptixCam Digital Microscope Camera
Nikon Optical Microscope with OptixCam Summit Series Digital Microscope Camera
The Nikon Optical Microscope, shown above, is equipped with an OptixCam Summit Series Digital Microscope Camera and objective lenses magnifications of 5x, 20x, 40x, and 100x. The OptixCam Digital Microscope camera enables measurements of length, width, height, thickness, circumference, radius, angles and dot counts with a 3.6 µm x 3.6µm resolution, and 640x480 pixel size1. The figures below show microscopy views obtained with the Nikon Optical Microscope at scales of 50, 20 and 2.76 microns.
An optical microscope image (at 200x) of a Spinel surface comparing the machined and unmachined regions
Ductile material chip imaged after SPDT (at 400x)
